Gaggenau VL041715 インストール手順

,

Before you plug in an electrical 

cord or turn on power supply, make sure all 
controls are in the OFF position.

Mark the center of the recess exactly. Fit the long 
mounting rail to the front, the short mounting rail 
to the rear of the recess. Make sure the lugs of 
the mounting rails lie on the worktop. The center 
marking on the mounting rail must be precisely 
flush with the center marking of the recess.
Note: when fitting the appliance in a stone 
countertop glue on the mounting rails with a 
temperature-resistant two-component adhesive 
(metal on stone).

Lower the appliance into the cut-out. The snap-in 
pins on the appliance must lie exactly on the 
catch springs. Firmly press the appliance into the 
cut-out. 

Note: If an aluminum pipe is used, first smooth the 
connection area.

Attach exhaust pipe to air connecting piece. 

Seal both junctions appropriately.

Note: The manufacturer of the device accepts no 
liability for claims caused by the piping.

▯

The device achieves optimum performance 
through a short, straight ventilation pipe and the 
largest possible pipe diameter.

▯

With long, coarse exhaust pipes and many pipe 
bends, the optimum suction performance is not 
achieved and fan noise becomes louder.