XO XOE30 オーナーマニュアル
2. Remove the bottom cover fixed in place with 3 screws.
3. Remove the Accessor y parts box from inside of the hood.
4.Non- ducted installation only
Remove the Recirculation Plate out of the hood and use sealing plate ( supplied in the
accessor y box) to seal the outlet off.
accessor y box) to seal the outlet off.
5.Non-ducted installation only
Attach the charcoal filter to the aluminum filter back, locking well with metal wires.
7
8
** Duct and roof cap/wall cap are not supplied.
Warning: to avoid the risk of fire, use only the metal ductwork.
NON-DUCTED VERSION
1.No need of plastic or metal duct.
1.No need of plastic or metal duct.
2. Must be installed charcoal filter on the hood.
NOTE: Buy a set of (2) non-ducted filters from your local retailer and attach them
to the aluminum mesh filters.
to the aluminum mesh filters.
PREPARATION OF THE HOOD BEFORE INSTALLATION
1. Remove the Aluminum filter from the hood.
HOUSE WIRING
HOUSE WIRING
26"-32"
26"-32"