Zephyr ZPYE30A マニュアル
Installation –
Preparing Electrical
9
ELECTRICAL
WARNING
All Electrical work must by performed by qualifi ed electrician or person with similar technical
knowledge and background.
knowledge and background.
For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use
extension cord or adapter plug with this appliance.
extension cord or adapter plug with this appliance.
Follow national electrical codes or prevailing local codes and ordinances.
Electrical Supply:
This appliance requires a 120V 60Hz electrical supply, and connected to an individual, properly
grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must
be 2 wire w/ ground. Please refer to Electrical Diagram labeled on product.
grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must
be 2 wire w/ ground. Please refer to Electrical Diagram labeled on product.
Cable Lock:
A cable locking connector (not supplied) might also be required by local codes. Check with local
requirements and codes, purchase and install appropriate connector if necessary.
requirements and codes, purchase and install appropriate connector if necessary.
ZPY-ExxAx and ZTA-ExxAS - 353 Watts, 3 Amps.
Cable Lock