Zephyr ZPYE30A マニュアル

For Tamburo (ZTA) only: 
Unscrew and remove the front cover 

2. Remove air diverter plate slot covers. Remove metal 
    air diverter plate from front slot and re-position to back 
    slot. Re-install air diverter plate covers.

1. Change rocker switch position from I to 0. 
    Rocker switch is located on electrical box to the right 
    of motor housing.

3. Using components from ZRC-0200, install (2) 
    charcoal   lter brackets and center panel to  
    bottom of the hood with (4) screws for each 
    component.  Screws are pre-installed to the hood.
    Remove screws   rst to install brackets and center 
    panel then re-install screws..

4. Install charcoal   lters into charcoal   lter brackets

5. Install the mesh   lters.

back slot

front slot

metal air 
diverter
plate

charcoal  lter 

bracket

center

panel

charcoal  lter 

bracket

rocker switch