OceanAire OWC3632 操作ガイド

ページ / 22
2. (CAUSE)  Thermostat 
 
(REMEDY)  Examine the control unit for loose wires. Tighten any loose connections. Wait 4-minutes 
before re-start. 
 
3. (REASON) High Pressure Control cutting (turning) unit off 
 
(FIXING)  Check for loose wire connections, broken or burned contacts. If switch is defective, replace. 
 
4. (CAUSE) Defective Power Module. 
 
(CURE) Replace 
 
5. (REASON)  Refrigerant leak-no freon. 
 
(REMEDY)  Locate leak and repair. Evacuate unit and recharge. 
 
6. (CAUSE) Loose or defective wires. 
 
(FIXING) Tug on wires to see if they will separate from connections. 
 
7. (REASON) Defective compressor 
 
(REMEDY) Check for shorts, opens and grounds. Remove and replace compressor. 
 
8. CAUSE) Shorted or open run capacitor 
 
(FIXING) Remove and replace. 
 
PROBLEM: COMPRESSOR STARTS AND RUNS, BUT, FAN DOES NOT RUN. 
 
1. (REASON) Open fan motor coil circuit 
 
(FIXING) Replace fan motor. 
 
2. (CAUSE) Shorted or open fan motor capacitor 
 
(REMEDY) Replace capacitor. 
 
3. (REASON) Loose or defective wires 
 
(REMEDY) Trace and repair 
13