Zephyr ZTEE30AS 入門ガイド

1.  Select preferred duct location (vertical or 

horizontal) if ducting out of kitchen.  Refer to 
page 10 for details.

2.  Install utensil bar to hood. Refer to page 12 for 

details.

3.  Begin installation by removing the mesh fi lters.

4.   Reinforce cabinet with 1”x2” wood strips 

if additional strengthening is required or if 
cabinets are framed.

5.  Temporarily position the range hood in the 

desired mounting location. Measure and 
mark the mounting holes, duct and electrical 
locations with a pencil.

6.  Drill/cut out the required openings for duct and 

electrical access; make sure the duct opening 
is large enough to apply duct tape.

7.  Fasten hood onto cabinet with (4) M4 wood 

screws provided.

8. Install 

electrical.

9.  Install duct work and seal with duct tape.

10. Reinstall mesh fi lters.

11. Power up hood and check for leaks around 

duct tape.

12. If recirculating the hood refer to page 11 for 

more details.

9. Aluminum duc

  tape

6. Duct

opening/
cutout

4. Add 1”x2” 

wood strips

2. Mesh

filters

8. Electrical

Fig 3