Zephyr ZTEE30AS 入門ガイド

Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive or 
abrasive detergent, or steel wool/scouring pads which will scratch and damage surface.  Do not use products 
containing chlorine bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless 
luster and grain. Always scrub lightly using a micro fi ber or clean cotton cloth and with grain.

The aluminum mesh filters are intended to trap residue and grease from cooking. Although the aluminum mesh 
fi lters should never need replacing, they are required to be cleaned every 30 days or more often depending on 
cooking habits.

Filters may be placed in dishwasher at low heat or soaked in hot soapy water  Dry fi lters and re-install before 
using hood.

1. Push in on fi lter handles.
2. Pivot front of fi lter downward.
3. Remove fi lter by pulling away from hood. 

All models and sizes 

 

50200030                     2

Fig 1