Movincool CLASSICPLUS14 サービスマニュアル

Repair Section

31

• Before troubleshooting the system, the following inspection should be performed.

• Check the voltage of the power source.

- Single phase 115 V (60 Hz)

• Check the operation and condition of the fuse or circuit breaker in the power source.

• Remove the air filters and check the element. If the element is dirty, wash it as described in the

OPERATION MANUAL supplied with the unit.

• Make sure tank is fully drained.

The following pages (page 32 to 39) are self-diagnostic codes and troubleshooting information. Detailed

information is contained in the OPERATION MANUAL supplied with the unit.