iON MEGAPARTY クイック設定ガイド
4
6.
Mic Treble: Adjusts the treble frequencies on microphone inputs 1-3.
7.
Mic Bass: Adjusts the bass frequencies on microphone inputs 1-3.
8.
Mic 3 Volume: Adjusts the volume for the Mic 3 input.
9.
Mic 3 Input: Connect a 1/4” microphone here.
10.
Power On/Off: Adjust this switch to power the unit on or off. The Media Panel
Power button or the remote control Power button will still need to be pressed to
power on the Media Panel.
power on the Media Panel.
11.
Voltage Selector: If your unit has a voltage selector switch, change its setting only
when necessary (e.g., when traveling to a country or region with a different voltage),
and replace the fuse with one with an appropriate rating (printed under the unit’s
power cable input, next to the desired voltage). Selecting an improper voltage
setting or using a fuse with an incorrect rating can damage the unit and/or fuse.
and replace the fuse with one with an appropriate rating (printed under the unit’s
power cable input, next to the desired voltage). Selecting an improper voltage
setting or using a fuse with an incorrect rating can damage the unit and/or fuse.
12.
Power Input: Insert the included power cable here to power the unit.
Remote Control
Note: In order to use the remote control for the first time, first pull
out the tab attached to the battery compartment. To change the
remote battery, follow the diagram located on the back of the
remote. Use a 3V DC CR2025 lithium button cell battery for
replacement.
Note: Aim the remote straight at the front of the speaker woofer.
Room lighting and battery life can affect the operating range of
the remote control.
1.
out the tab attached to the battery compartment. To change the
remote battery, follow the diagram located on the back of the
remote. Use a 3V DC CR2025 lithium button cell battery for
replacement.
Note: Aim the remote straight at the front of the speaker woofer.
Room lighting and battery life can affect the operating range of
the remote control.
1.
Power Button: Press this button to power on the unit or to
put it into low power mode. Ensure the rear panel Power
switch is in the “On” position.
put it into low power mode. Ensure the rear panel Power
switch is in the “On” position.
2.
Source: Press this to select one of the modes: BT
(Bluetooth), USB, Radio, or Aux.
(Bluetooth), USB, Radio, or Aux.
3.
Menu: Cycles through the menu options. Use the
Volume/Multi knob to change the selected parameter:
•
Volume/Multi knob to change the selected parameter:
•
B = Bass adjustment
•
T = Treble adjustment
•
MI = Microphone level adjustment (a microphone will
need to be plugged into the unit in order for this
option to appear in the Menu.)
need to be plugged into the unit in order for this
option to appear in the Menu.)
•
E = Echo amount (a microphone will need to be
plugged into the unit in order for this option to
appear in the Menu.)
plugged into the unit in order for this option to
appear in the Menu.)
4.
-: This acts like the Volume/Multi knob to adjust the Menu
options.
options.
5.
+: This acts like the Volume/Multi knob to adjust the Menu
options.
options.
6.
Number keys: Provides Preset channel selection for FM
radio stations, and track selection for USB sources. Press
10+ to jump 10 tracks on the USB source or through the radio station presets.
radio stations, and track selection for USB sources. Press
10+ to jump 10 tracks on the USB source or through the radio station presets.
7.
Disconnect: Press to disconnect from a Bluetooth source.
8.
Preset: Saves a radio station preset. Press this button and then enter a number from 01-40 to save the
current radio station to a preset to quickly recall.
current radio station to a preset to quickly recall.
9.
Light: Controls the light modes coming from the speaker panels.
•
•
R = red lights flash
•
G = green lights flash
•
B = blue lights flash
•
RG = red and green lights flash
•
RB = red and blue lights flash
•
GB = green and blue lights flash
•
RGB = red, green, and blue lights flash
•
Auto = the various color combinations cycle through and flash.
•
Demo = lights flash and change color as if they were responding to the beat of the music.
10.
Stereo Mono: This function is used when listening to a radio station. Select mono if the FM radio signal is
weak to improve the quality.
5
6
7
1
2 3
4
8
9
10
10
11
11
12
12
DOME
LIGHT
VOL+
TU
TU+
CH+
CH
VOL-
-
-
AUTO
PRESET
XDRIVE
MUTE
STEREO
MONO
1
2
3
4
5
6
7
8
9
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19 20
20
21
21
22
22