iON MEGAPARTY クイック設定ガイド

11.

Prev: Goes to the previous USB track. When listening to Bluetooth sources, pressing Prev in some apps may

go to another playlist or music genre.

12.

Next: Advances to the next USB track. When listening to Bluetooth sources, pressing Next in some apps may

go to another playlist or music genre.

13.

Play/Pause/Auto: Plays or pauses the USB, or Bluetooth Media Panel source.

Note: Files are played from the USB source first by alphabetical order of what is on the root level, then
alphabetical by folder, and then alphabetical by the track name.

14.

Mute: Silences the music playback on Media Panel sources.

15.

Dome: The dome light can react to the music playing (depending on the Dome Mode that is selected). There

are three modes to select from for the dome lights to react to the music.
•

M1 = In Auto mode, the dome lights spin and change color with a predetermined pattern regardless of
the beat of the music playing.

•

M2 = In Beat Sync mode, the dome lights spin and change color to the beat of the music playing.

•

Off = the dome lights are off.

16.

XDrive: Turn this on to increase the bass response.

17.

Tu-: Press and release this button to skip backward through the radio channels. Press and hold this button for

2 seconds to travel through the FM band to find the next strongest station.

18.

Tu+: Press and release this button to skip forward through the radio channels. Press and hold this button for 2

seconds to travel through the FM band to find the next strongest station.

19.

Vol –: Decreases the Media Panel source volume.

20.

Vol +: Increases the Media Panel source volume.

Note: The remote volume only affects the Media Panel source and works together with the physical Media
Panel volume knob on the unit’s rear panel.

21.

Ch-: Scroll backward through the saved radio station presets.

22.

Ch+: Scroll forward through the saved radio station presets.

Pairing a Bluetooth Device

Turn on your Bluetooth device.

Power on Mega Party Express.

Use the Source button to select Bluetooth Mode which appears as “BT” (flashing) and Mega Party Express
will go into pairing mode to search for Bluetooth devices.

Navigate to your Bluetooth device’s setup screen, find “ION Mega Party X”, and connect. “BT” will now be lit
solid.
Note: Users should consider updating their device’s OS if experiencing trouble with pairing or playing music.

To disconnect pairing, turn off Bluetooth on your device or select “forget this device” from your device.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce the overall
volume of Mega Party Express.

If there is too much bass: Try adjusting the tone or EQ control from Mega Party Express or your sound source to
lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs.

If there is a high-pitched whistling noise when using a microphone: This is probably feedback. Point the
microphone away from the speaker.

If you can’t hear the microphone over the music volume: Turn down the music volume from your source.

If Mega Party Express will not power on: Ensure the rear panel Power switch is in the “On” position, then use the
Power button on the front panel or remote.

If you can’t hear the microphone: Adjust the microphone volume by using the Menu button on the front panel or
the remote. This control is only available when the microphone is plugged in.

I can't adjust the Echo level on the microphone: The microphone must be plugged in to adjust the microphone
volume. Adjust the Echo level using the Menu button on the front panel or the remote.

I'm having trouble playing back material on my flash drive: If you continue to have this issue, try reformatting
your USB media and re-adding your music to your USB media storage device.

When I hit mute I still hear music out of the RCA line output: Mute/Volume 00 does not mute the audio going to
the Line Out.