WineMate Wine Cooling Unit - Top Exhaust 使用とお手入れ
8) Removing the Evaporator
1. Unplug the WINEMATE cooling unit or disconnect power.
2. Remove the WINEMATE cooling unit from the enclosure opening.
3. Remover the outer cover.
4. Remove the side and top styrofoam parts.
5. Remove side and top fan shrouds
6. Place piercing valves onto the process tubes and discharge the refrigerant
2. Remove the WINEMATE cooling unit from the enclosure opening.
3. Remover the outer cover.
4. Remove the side and top styrofoam parts.
5. Remove side and top fan shrouds
6. Place piercing valves onto the process tubes and discharge the refrigerant
into an approved R134a recovery system.
7. Cut the capillary line and suction line from the evaporator.
8. Remove 4 rivets from the evaporator.
9. Remove the evaporator.
8. Remove 4 rivets from the evaporator.
9. Remove the evaporator.
II. Coil Cleaning
• Clean the condenser coil regularly. Coil may need to be cleaned at
least every 6 months.
• Coil is on the back of the wine cellar.
• Unplug the cellar or disconnect power.
• Use a condenser brush or a vacuum cleaner with an extended
attachment to clean the coil when it is dusty or dirty.
• Plug wine cellar or reconnect power.
III. Moisture Removing
• Remove the extra condensate if it is accumulated in the wine cellar at
high ambient temperature and humidity.
- 15 -