WineMate Wine Cooling Unit - Top Exhaust 使用とお手入れ
• Cut a rectangular opening with the ¼” clearance inwards to the width and
height of the cooling unit, the opening is positioned from the top and
center of the cabinet.
center of the cabinet.
• If top exhaust, cut a rectangular opening to the length and width of the top
exhaust openings at the top of the cabinet.
• Mount the gaskets on the four rear mounting sides.
• If top exhaust, place the gaskets along the top openings at the top of the
cooling unit.
• Place the cooling unit to a flat and stable place.
• Then move it on the top of the rack temporally.
• Move the cooling unit towards the mounting sides and push to press the
gasket.
• Locate the 2 brackets (6) and use 7/16” wrench to tighten the 2 screws (7).
• If top exhaust, install the top exhaust grille at the top of the cabinet with
the arrow towards the front and facing down the cabinet.
• Plug the Wine-mate cooling unit in receptacle.
• Screw the 2 screws (4) and locate the light on the ceiling.
• Plug the light in receptacle.
• Plug the wine cellar.
3. Electrical Cord
• Because of potential safety hazards under a certain condition, we strongly
recommend against the use of an extension cord. However, if you still
elect to use an extension cord, it is absolutely necessary that it will be a
UL LISTED 3-wire grounding type appliance extension cord having a 3-
blade grounding plug and a 3-slot receptacle that will plug into the
appliance. The marked rating of the extension cord should be 115 V, 15 A.
elect to use an extension cord, it is absolutely necessary that it will be a
UL LISTED 3-wire grounding type appliance extension cord having a 3-
blade grounding plug and a 3-slot receptacle that will plug into the
appliance. The marked rating of the extension cord should be 115 V, 15 A.
- 7 -