Electrolux E30IC75FSS オーナーマニュアル

POWER LEVEL SETTINGS - The Cooking Zones have four separate Power Level LEDs.
Once active, the Cooking Zones will provide 10 Power Levels to choose from. These
include 

1 1 1 1 1 

(Fig. 12)

, 22222

, 

33333

,

 44444

,

 55555

,

 66666

 (Fig. 14),

 77777

,

 88888

,

 99999

.

     

The highest setting of

 P

 P

 P

 P

 P

 or “Power Boost”

provides 125% power level for 10 minutes (See Fig. 13). Each key pad touch (or just
holding down the Power Level key pad) will scroll through all the available power levels for
any Cooking Zone quickly (See pages 14-17 for complete instructions).

RESIDUAL HEAT - Once any Cooking Zone has been used for cooking and turned OFF,
and if the cooktop surface temperature on any of the Cooking Zones is still too HOT, 

HHHHH

(See Fig. 15) will appear in the LED display for the affected Cooking Zone. The 

HHHHH

 will

continue to display if the temperature is still too HOT.

KEEP WARM - Use the WARM (or LOW) key pad to activate the Warm setting for any of
the Cooking Zones. The ON/OFF key pad for the desired Cooking Zone must be activated
first, then touch the WARM key pad located in the Cooktop Main Control area once to set. 

LLLLL

(LOW) should appear in the corresponding Cooking Zone LED (See Fig. 16 & page 16 for
complete information).

PAN DETECTION - All four Cooking Zones will provide a Pan Detection message. If a
Cooking Zone is turned ON and no pan is detected for the Cooking Zone, the pan has been
moved or if the pan is not centered correctly or if the pan is not made of magnetic material,

FFFFF

 (See Fig. 17) will appear in the affected Cooking Zone LED display.

!

CA

CA

CA

CA

CAUTION

UTION

UTION

UTION

UTION

The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass
surface may be HOT form residual heat transfered from the cookware and burns may occur.