Electrolux E24RD75HPS オーナーマニュアル

Sabbath mode disables portions of the 

unit and its controls in accordance with 

the weekly Sabbath and religious holidays 

observed within the Orthodox Jewish 

community.

Sabbath mode is enabled and disabled by pressing and 

holding the 

vacation mode key for five (5) seconds and 

then releasing the key.  Temperature display shows “Sb” 

while in Sabbath mode.

door ajar 

If the door has been left open for five (5) 

minutes, an audible alarm will sound and 

the door ajar indicator will illuminate on 

the right side of the display.  The mute 

 indicator will blink.  Pressing 

and releasing the mute sounds key will 

acknowledge the alarm and disable the 

audible portion.  The door ajar indica-

tor will continue to blink until the door is 

closed.

high temp 

In the event of a high temperature condi-

tion, an audible alarm will sound, the 

temperature display will blink and display 

“HI”, and the high temp indicator on the 

right side of the display will blink.  The 

 indicator will blink.  Press-

ing and releasing the mute sounds key 

will acknowledge the alarm and disable 

the audible portion.  All other modes are 

turned off until the alarm is acknowledged.  

The high temperature indicator and 

vacation mode  Conserves energy by disabling interior 

lights and keypad inputs.

mute sounds 

Tones emitted by each keypress can be 

turned off based on user preference.  The 

sounds are muted when the red indicator 

is lit.  The mute sounds key also is used 

to acknowledge alarm conditions, denoted 

by a flashing red indicator.  Press and 

hold the mute sounds key for three (3) 

seconds then release to enable control 

, which prevents undesired changes 

to the unit settings.  Temperature display 

will show “LOC”.

temperature 

Simultaneously press and hold the (+) and 

(–) keys for three (3) seconds then releas-

ing the key causes the temperature display 

to toggle from Fahrenheit to Celsius and 

back again.

on off 

Press and hold for three (3) seconds then 

release the key.  This allows the user to 

turn off the cooling system.  The tempera-

ture display will display “OFF”.  THIS DOES 

NOT REMOVE POWER FROM THE UNIT.

“HI” will stay illuminated until a normal 

safe range operating temperature has been 

reached, at which time the temperature 

display will show the actual temperature.

power fail 

In the event of a power failure or initial 

power-up, an audible alarm will sound 

and the power fail indicator on the right 

side of the display will blink.  The mute 

 indicator will blink.  Pressing 

and releasing the mute sounds key will 

acknowledge the alarm and disable the 

audible portion.  All other functions are 

disabled until the alarm is acknowledged, 

at which point the power fail indicator is 

turned off and the unit will resume normal 

operation.  The high temp alarm may 

also be illuminated until a safe temperature 

has been reached.

air filter  

After six months of use the display will 

show AF.  This is a reminder that it is 

time to change the PureAdvantage

TM

 

air filter. The product will continue to 

function normally.  Pressing any key will 

reset the reminder for 10 minutes. Once 

the PureAdvantage

TM 

air filter is replaced, 

pressing the “On/Off” and “– “ keys for 

three seconds will reset the reminder for 

another six months.