Electrolux E24RD75HPS オーナーマニュアル
9
Operation / Maintenance
Removing Your Refrigerator
Drawers
Drawers
To remove the top drawer:
1. Fully extend the drawer.
2. Disconnect connector.
3. Remove two screws using Phillips
2. Disconnect connector.
3. Remove two screws using Phillips
®
screwdriver.
4. Remove drawer by sliding forward 1/2” and
pull up.
5. Reverse procedure to reinstall drawer.
Disconnect
Connector
To remove the bottom drawer:
1. Fully extend the drawer.
2. Remove two screws using Phillips
2. Remove two screws using Phillips
®
screwdriver.
3. Remove drawer by sliding forward 1/2” and
pull up.
4. Reverse procedure to reinstall drawer.
The customer may open or close the door at any time
without concern of directly turning on or off any lights,
digital readouts, solenoids, fans, valves, compressor,
icons, tones or alarms. After power failure, the
appliance will immediately return to Sabbath mode.
While in Sabbath mode, alarm indicators will not
appliance will immediately return to Sabbath mode.
While in Sabbath mode, alarm indicators will not
illuminate, nor be accompanied by audible alarms.
For further assistance, guidelines for proper usage
For further assistance, guidelines for proper usage
and a complete list of models with the Sabbath
feature, please visit the web at http:\\www.star-k.org.
Maintaining Your Refrigerator
Drawers
Drawers
Periodic cleaning and proper maintenance will
ensure efficiency, top performance, and long life. The
maintenance intervals listed are based on normal
conditions. You may want to shorten the intervals if you
have pets or other special considerations.
ensure efficiency, top performance, and long life. The
maintenance intervals listed are based on normal
conditions. You may want to shorten the intervals if you
have pets or other special considerations.
Exterior Cleaning for Your Stainless Steel
Model
Model
• Your stainless steel model may discolor when
exposed to chlorine gas, pool chemicals, salt
water, cleaners with bleach, or citrus based
cleansers.
• Keep your stainless appliance looking new by
cleaning with a high quality, all-in-one stainless
steel cleaner/polish and a soft cloth on a
monthly basis. Frequent cleaning will remove
surface contamination that could lead to rust.
Some installations will require cleaning on a
weekly basis.
• DO NOT CLEAN WITH STEEL WOOL PADS.
• DO NOT USE CLEANERS THAT ARE NOT
• DO NOT USE CLEANERS THAT ARE NOT
SPECIFICALLY INTENDED FOR STAINLESS
STEEL (this includes glass, tile, and counter
cleansers).
• If any surface discolors or rusting appears, clean
it quickly with Bon-Ami
®
or Barkeepers Friend
®
Cleanser and a non-abrasive cloth. Always clean