Electrolux UR15IM20RS オーナーマニュアル

10 Installation

Adjustable legs at the front and rear corners 

of the appliance should be set so the unit is 

firmly positioned on the floor and level from 

side-to-side and front-to-back. The overall 

height of your appliance may be adjusted 

to higher (by turning the leveling leg out, 

counter clockwise) and lower (by turning 

the leveling leg in, clockwise) dimensions as 

shown in Table "A".

Table A

UR15IM20RS

UL15IM20RS

33 

5

⁄

8

" 

(85.4 cm)

34 

3

⁄

4

" 

(88.3 cm)

Figure 9

Front grille

Front grille screw

To adjust the leveling legs, place the 

appliance on a solid surface and protect 

the floor beneath the legs to avoid 

scratching the floor. With the assistance of 

another person, lean the appliance back 

to access the front leveling legs. Raise or 

lower the legs to the required dimension 

by turning the legs. Repeat this process 

for the rear by tilting the appliance forward 

using caution. On a level surface check 

the appliance for levelness and adjust 

accordingly.

  1  Use a level to check the levelness of 

the ice maker from front to back and 

from side to side (Figure 10).

  2  If the ice maker is not level, adjust 

the feet on the corners of the unit as 

necessary (Figure 11).

  3  Check the levelness after each 

adjustment and repeat the previous 

steps until the unit is level.

Figure 10

Check

Level

Figure 11

Turn Foot

to Adjust