Electrolux UL15IM20RS オーナーマニュアル

20 Maintenance

If the ice machine is moved, not used 

for an extended period of time, or will 

be in an area that will be near freezing 

temperatures, it is necessary to remove 

any remaining water in the ice-making 

system.

Electrical Shock Hazard. Risk 

of electrical shock or personal 

injury could occur due to 

moving components, if machine 

compartment access cover is 

removed before unplugging the ice 

machine.

This ice machine must have all water 

drained and removed to prevent ice 

machine damage as well as possible 

water damage to the surrounding 

area in freezing conditions. These 

damages are not covered under 

warranty.

Do not use any type of anti-freeze or 

other solution as a substitution for 

properly draining the ice machine.

Cleaning the ice machine will help prevent 

mold and mildew growth as well as 

sanitize the ice machine for storage or 

when it is put back into service.

  1.  Turn off the water supply to the ice 

machine.

  2.  Disconnect the water supply fitting at 

the inlet of the water valve (Figure 2).

  3.  Change the electronic control to the 

“CLEAN” position for approximately 

one minute. This will energize and 

open the water valve and remove 

most of the water from the water 

valve and the water valve’s outlet 

water line to the reservoir.

  4.  Change the electronic control to the 

“OFF” position. This will energize 

and open the drain valve to drain the 

reservoir and the ice machine drain 

system.

  5.  Unplug the ice machine from the 

electrical outlet.

Figure 2

Back view of

ice machine

Water

Supply

Line

Water Supply Fitting

Water Valve Inlet