Electrolux UL15IM20RS オーナーマニュアル

22 Maintenance

 14.  Remove the top clamp from the vent 

tube, for easier access for the air 

hose.

 15.  Apply air pressure (approximately 10 

psi) to the end of the vent tube which 

will purge the remainder of the water 

from the drain pump and the drain 

line (Figure 6).

 16.  Reinstall the vent tube and clamp 

to the back of the ice machine and 

remove the winterization plug from 

the ice bin and save it for future use.

  1.  Reconnect or turn on the water 

supply line.

  2.  Reconnect drain tubing if removed.
  3.  Plug in the power cord to a wall 

outlet and turn the ice machine on.

  4.  Check the water inlet, drain lines, and 

fittings for any water leaks.

  5.  Check drain pump (if equipped) 

operation by pouring approximately 

two quarts of water into the ice 

storage bin. The drain pump should 

activate and discharge water (refer to 

Drain Pump section). Check for water 

leaks at all hose connections.

Figure 6

Vent

tube

Drain

line

Remove 

clamp

screw