Electrolux E48DF76EPS インストール手順
Professional Series Range LPG Conversion Kit
Page 11
STEP 12 Apply labels and reassemble
12-1 Wait for all the burners to cool.
12-2 Fill out and apply the conversion labels:
12-2 Fill out and apply the conversion labels:
• Apply one where it can be easily read on the
floor of the chassis.
• Apply the other next to the rating label on the
back of the range.
12-3 Remove all of the burner heads.
12-4 Install the spill tray.
12-5 Replace the burner heads, burner head nuts,
12-5 Replace the burner heads, burner head nuts,
burner rings, and burner caps. Be sure the
igniter wire is connected to the igniter for each
burner head.
12-6 Install the cooktop grates.
12-7 Re-install the regulator access panel on the back
12-7 Re-install the regulator access panel on the back
of the range.
Figure 12-1 Conversion Label
Altitude Considerations
The Electrolux Professional Series range is equipped with two types of burners:
Sealed power burners – up to 17,000 BTU per hour
Sealed precision burner(s) – up to 8500 BTU per hour (smaller in size than the power burner)
For elevations above 2000 feet, the burners ratings will be reduced at the rate of 4% for each 1000 feet above
sea level.