Electrolux E36WV100FS オーナーマニュアル

Figure 13

1  Run 120 VAC electrical power cable to the hoods wiring box.

2  Remove the cover from the wiring box and remove one knockout.

3  Feed 6” of cable through the knockout opening and secure the cable 

to the wiring box with an appropriate connector.

4  Make electrical connections at the hood. Connect white-to-white, black-

to-black, and green-to-ground.

5  Replace the wiring box cover and screws. Make sure wires are not 

pinched between the cover and box.

1  Install an adequate length of 8” diameter steel ducting to the range 

hood’s duct connector.

2  Connect the duct work between the range hood and duct leading to 

the outside location.

3  Duct tape all joints to make them secure and air tight.

WARNING