Electrolux EI30EW45KB オーナーマニュアル

1. Fully open the oven door.

2. Unlock both oven door hinge locks by pulling 

them up and away from the oven frame until 

they stop (unlocked position) -fig. 2-. If needed 

use a small flat-bladed screwdriver to assist with

loosening the door hinge locks.

3. Firmly grasp both sides of oven door -fig. 3-.

4. Before completing this step, be prepared to hold the

whole weight of the door while grasping the sides 

of the oven door with both hands. Hold midway 

down the oven door sides. Close the oven door to 

about 4 inches and continue closing beyond the 

door stop position. The oven door should release 

from the frame on its own -fig. 3-.

5. Carefully lift door away evenly, slightly up and 

out until both hinge arms are clear of the hinge 

slots in the oven frame -fig. 3-. After door has 

been removed, be sure to lay the door flat with

the inside of the door downward (never rest the 

oven door with any weight on the door handle).

Fig. 2

Fig. 3

Fig. 1

•

 

removing and lifting the door. Do not lift the 

oven door by the handle.

1.  Firmly grasp the oven door along both sides 

just below the door handle. When positioning

the door hinge arms with the door hinge slots in 

the oven frame, you may wish to use your knee 

to stabilize the door before attempting to insert 

the door hinge arms in the hinge slots.

2.  Position the angle of the door to the door 

removal angle and carefully insert the door 

hinge arms fully and evenly into the door 

hinge slots. Carefully let the weight of the door 

transfer from your hands so that the oven now 

supports the oven door.

3.  Open the oven door down to the fully open 

position.

4.  With the door in the fully open position, push 

both oven door hinge locks toward the oven 

frame until they both are locked.

5.  Close the oven door.