Electrolux EWMED7CJSS インストール手順

 

1  Be sure you have adequate swing area before reversing door.

 

2  You will need a screw driver with a #2 square bit.

 3 Protect 

fl at work surface, such as top of dryer or fl oor near dryer, 

with a soft cloth or towel.

 

4  Be sure dryer is unplugged from power source!

ELECTRICAL SHOCK HAZARD

Failure to disconnect power source before servicing 
could result in personal injury or even death.  

Screwdrivers with

#2 square &

straight bit 

A) Removing Trim Ring

 

1  Open door to 90 degree angle.

 

2  Remove and save trim plug and long, 

course-thread, panhead screw. 

 3 Close 

door.

 

4  Rotate door trim approximately ¾” counter-

clockwise and pull ring away from door.

 

4  Gently place door face down on fl at, covered 

work surface. 

 

3  While supporting the weight of the door 

with both hands, separate the door from the 
hinge.

B) Removing Door from Hinge

 

1  Reopen door to 90 degree angle.

 

2  Remove 4 long, course-thread, counter-sunk 

hinge screws from door.