Philips BM50B/10 ユーザーズマニュアル

6 Other features

Set the alarm timer

This unit can be used as an alarm clock. You

can select DISC, USB, or TUNER as the alarm

source.

Note

•

Make sure that you have set the clock correctly.

In standby mode, press and hold SLEEP/

TIMER for 3 seconds.

Press / repeatedly to select an

alarm source (DISC, USB,or TUNER)

Press SLEEP/TIMER to confirm.

The hour digits begin to blink.

Repeat steps 2-3 to set the hour, minute,

and adjust volume of the alarm.

Note

•

If no button is pressed in 90 seconds, the system exits

timer setting mode automatically.

To activate or deactivate the alarm timer:

• Press SLEEP/TIMER repeatedly to view

the alarm information and activate or

deactivate the alarm.

If the timer is activated,

[TIMER](Timer) is displayed.

If the timer is deactivated, [TIMER

OFF] (timer off) is displayed and

[TIMER](Timer) disappears.

Tip

•

If no DISC or USB is detected, the system will use FM

as the default alarm source.

Set the sleep timer

• Press SLEEP/TIMER to set the number of

minutes before the unit automatically turns

off:

• [SLP 120]

• [SLP 90]

• [SLP 60]

• [SLP 45]

• [SLP 30]

• [SLP 15]

• [SLP OFF]

Tip

•

Sleep timer can only be set when the unit is ‘On’.

Listen from an external device

You can listen to an external device through this

unit with an audio cable.

Press FM/AUDIO IN repeatedly to select

the AUDIO IN source.

Connect an audio cable (not supplied)

between:

• the AUDIO IN socket (3.5 mm) on

the unit;

• and the headphone/LINE OUT socket

on an external device.

Start to play music on the connected

device (see the device user manual).