Philips BM50B/10 ユーザーズマニュアル

18 EN

Listen through a headphone

•  Plug a headphone (not supplied) into the 

 socket.

  

Update firmware

Warning

 

•

Always connect the speaker to AC power for firmware 

upgrade. 

 

•

Never power off the speaker or unplug the USB mass 

storage device before completion of the firmware 

upgrade.

Note

 

•

Make sure that the USB stick is FAT16/32 formatted.

1 

On your PC/Mac, go to www.philips.com/

support.

2 

Enter the model number to find the latest 

firmware upgrade files available.

  

3 

Unzip and save the upgrade files to the 

root directory of a USB stick. 

4 

Press USB to select the USB source, then 

plug the USB stick into the USB socket on 

the back of the speaker.

5 

Do not remove the USB stick, and wait for 

around 3 to 4 minutes for completion of 

the firmware upgrade.

 

»

During firmware upgrade, ‘UPGRADE’ 

is shown on the display panel.

 

»

At completion of firmware upgrade, 

‘SUCCESS’ is shown on the display 

panel.

6 

Disconnect the AC power of the speaker 

and unplug the USB stick.

7 

Connect AC power again and turn on the 

speaker.

Tip

 

•

At completion of upgrade, remember to delete the 

upgrade files from your USB stick.

www.philips.com/support

 XXXX

 XXXX. zip