Philips BM50B/10 ユーザーズマニュアル

22 EN

Bluetooth cannot be connected with this unit.

 • The device does not support the profiles 

required for this unit. 

 • The Bluetooth function of the device is 

not enabled. Refer to the user manual of 

the device to find out how to enable the 

function.

 • This unit is not in pairing mode. 

 • This unit is already connected with another 

Bluetooth-enabled device. Disconnect that 

device and then try again.

The paired mobile device connects and 

disconnects constantly.

 • The Bluetooth reception is poor. Move the 

device closer to this unit or remove any 

obstacle between them.

 • Some mobile phones may connect and 

disconnect constantly when you make 

or end calls. This does not indicate any 

malfunction of this unit.

 • For some devices, the Bluetooth 

connection may be deactivated 

automatically as a power-saving feature. 

This does not indicate any malfunction of 

this unit.

Timer does not work

 • Set the clock correctly.

 • Switch on the timer.

Clock/timer setting erased

 • Power has been interrupted or the power 

cord has been disconnected. Reset the 

clock/timer.

Group connection failed

 • Move slave speakers closer to the master.

 • You can only add slave speakers one by 

one.

 • You cannot group more than four speakers 

with the master.

 • The master speaker may have switched to 

single mode.

Occasional stuttering or breaking of music 

streaming during group playback

 • If you experience music stuttering or 

breaking of streaming, it could be that your 

home Wi-Fi network is busy. Even though 

Izzylink is independent from your home 

Wi-Fi network, it uses Wi-Fi signals to 

communicate between the speakers. Try 

the following : 1) Reduce traffic on your 

home Wi-Fi network, e.g. stop any large file 

downloads or other content streaming on 

your Wi-Fi network; 2) Reboot the Master 

speaker, by unplugging it from the mains 

and plugging it in again.