Philips BDH4222V/00 ユーザーズマニュアル

1

For most PC's, connect the 15-pin D-Sub RGB connector of the PC 
to the RGB-IN connector of the monitor. If you have a PC that is 
equipped with a DVI (Digital Visual Interface), you may connect the 
PC DVI connector from the PC to the DVI-In connector of the 
monitor.

2

Connect the red (R) and white (L) audio jacks of the PC to the R and 
L jacks of the monitor. If you are using a DVI interface, simply 
connect the (R) and (L) audio jacks to the R and L jacks located to 
the left of the VIDEO 1 connector.

●

Your PC may have audio jacks in the form of a 3.5mm phono plug. 
If this is the case, you will need to use a phono-plug to RCA 
converter cable in order to connect audio.

●

A RGB loop-out labeled "RGB Out" will allow another RGB monitor 
to be connected. The RGB loop-out will display the same signal as 
the RGB In signal source.

●

The physical monitor resolution is a maximum 1024x1024 dots. 
If the PC's monitor resolution exceeds these maximums, the 
monitor will have to artificially eliminate dots in order to fit within 
the physical dot capability of the monitor; therefore, it is possible 
that the monitor may not be able to show details with adequate 
clarity.