Epson SP4900DES ユーザーズマニュアル
A
Open the right-hand side cartridge cover.
Press the groove in the cartridge cover to open
the cover.
the cover.
B
Pull Maintenance Box 1 out.
Lifting Maintenance Box 1 up releases the lock,
and you can simply pull it straight out.
and you can simply pull it straight out.
C
Place the used Maintenance Box 1 in the clear bag
included with your new Maintenance Box 1, and
make sure that the zipper is closed tight.
included with your new Maintenance Box 1, and
make sure that the zipper is closed tight.
D
Insert the new Maintenance Box 1.
Note:
Pay attention to the following since the printer may
not operate or print correctly otherwise.
Pay attention to the following since the printer may
not operate or print correctly otherwise.
❏ Do not touch the green IC chip on the side of
Maintenance Box 1.
❏ Do not remove the film from the top of
Maintenance Box 1.
E
Close the cartridge cover.
Replacing Maintenance Box 2
The instructions for replacing Maintenance Box 2
(Maintenance Box for borderless printing) are as
follows.
(Maintenance Box for borderless printing) are as
follows.
The on-screen message reads Maintenance Box 2,
however the product name for this consumable is
Borderless Maintenance Box.
however the product name for this consumable is
Borderless Maintenance Box.
Note:
Do not replace Maintenance Box 2 while printing.
Printing stops if the lock on Maintenance Box 2 is
released. If stopped in the middle of printing, colors may
vary and/or print quality may decline once printing is
resumed.
Do not replace Maintenance Box 2 while printing.
Printing stops if the lock on Maintenance Box 2 is
released. If stopped in the middle of printing, colors may
vary and/or print quality may decline once printing is
resumed.
Epson Stylus Pro 4900/4910 User's Guide
Maintenance
122