Epson SP4900DES ユーザーズマニュアル
F
Set the lock.
G
Attach the output tray.
Return optional SpectroProofer if it was
installed.
installed.
Replacing the Cutter
Replace the cutter when it is not cutting paper cleanly.
Supported cutter
U
Use a cross-head screwdriver to replace the cutter. Make
sure you have a cross-head screwdriver with you before
replacing the cutter.
sure you have a cross-head screwdriver with you before
replacing the cutter.
Note:
Take care not to damage the cutter blade. Dropping it or
knocking it against hard objects may chip the blade.
Take care not to damage the cutter blade. Dropping it or
knocking it against hard objects may chip the blade.
A
Turn off the printer.
If paper is loaded, remove it from the printer.
Remove when the optional SpectroProofer is
installed. USpectroProofer Mounter 17" User's
Guide
Remove when the optional SpectroProofer is
installed. USpectroProofer Mounter 17" User's
Guide
B
Open the cartridge covers on the left and right.
C
Open the printer cover.
D
Remove the front cover.
Use a cross-head screwdriver and remove the
four screws holding the front cover in place.
Remove the front cover.
four screws holding the front cover in place.
Remove the front cover.
Epson Stylus Pro 4900/4910 User's Guide
Maintenance
124