Epson SP4900DES ユーザーズマニュアル
Space at the rear
When loading thick paper or printing from the paper
cassette with the optional SpectroProofer installed,
paper is ejected once from the rear of the printer before
printing. Therefore, make sure the following space is
secured. If the printer is set up near a wall, make sure
there is enough space at the rear.
cassette with the optional SpectroProofer installed,
paper is ejected once from the rear of the printer before
printing. Therefore, make sure the following space is
secured. If the printer is set up near a wall, make sure
there is enough space at the rear.
Paper Size
Rear Space
A2
Approx. 370 mm
Super A3
Approx. 260 mm
A3
Approx. 200 mm
A4
Approx. 70 mm
Loading the Paper Cassette
Note:
❏ Do not remove or insert the paper cassette while
printing. It may cause print quality to decline or
cause a paper jam.
cause a paper jam.
If you remove the paper cassette while printing, wait
until printing is complete to reinsert it.
until printing is complete to reinsert it.
❏ When loading paper in the paper cassette, always
remove the paper cassette from the printer and
follow the steps below. If paper is loaded while the
paper cassette is still in the printer, it could cause
print quality to decline or cause a paper jam.
follow the steps below. If paper is loaded while the
paper cassette is still in the printer, it could cause
print quality to decline or cause a paper jam.
Tip:
Some paper types cannot be printed from the paper
cassette. U
Some paper types cannot be printed from the paper
cassette. U
Use the front manual feed or rear manual feed method for
these papers.
these papers.
A
Remove the output tray.
Lift the edge of the output tray slightly to remove
it.
it.
B
Slide out the paper cassette, and then hold both
sides of the cassette to pull it out.
sides of the cassette to pull it out.
Epson Stylus Pro 4900/4910 User's Guide
Basic Operations
35