Epson SP4900DES ユーザーズマニュアル

ページ / 177
Loading Cut Sheets
You can load cut sheets using the following three
methods.
Note:
If the paper is wavy or curled, flatten the paper before
loading it in the printer, or use new paper. If wavy or
curled paper is loaded, this printer may not be able to
recognize the paper size, feed the paper, or print correctly.
We recommend that you return the paper to its original
package and store it flat, and take it out of the package
just before you use it.
A
Paper cassette
You can load a stack of paper if you normally print
on the same paper, or you are printing multiple pa‐
ges of the same paper. You can load paper with the
following specifications.
Size
: 8 x 10 inch to A2
Width
: 203 to 432 mm (8 to 17 inch)
Length
: 254 to 594 mm (10 to 23.4 inch)
Thickness
: 0.08 to 0.27 mm
How to load U 
B
Front manual feed (loading thick paper)
You can load thick paper with the following speci‐
fications from the front feeder. However, you cannot
feed from the front feeder when the optional Spec‐
troProofer is installed.
Size
: 8 x 10 inch to A2
Width
: 203 to 432 mm (8 to 17 inch)
Length
: 254 to 610 mm (10 to 24 inch)
Thickness
: 0.8 to 1.50 mm
How to load U 
C
Rear manual feed
You can load cut sheets with the following specifi‐
cations manually one by one. Use this feeding meth‐
od when printing a single page whose media type or
paper size is different from the ones loaded in the
paper cassette.
Size
: 8 x 10 inch to A2
Width
: 203 to 432 mm (8 to 17 inch)
Length
: 254 to 610 mm (10 to 24 inch)
Thickness
: 0.08 to 0.79 mm
How to load U 
Epson Stylus Pro 4900/4910     User's Guide
Basic Operations
34