Mitsubishi Electronics DX-TL16U ユーザーズマニュアル

Digital Video Recorder 

 27

 
 
Video Loss Settings (EVENT 

 Video Loss Tab) 

 

 

 

Figure 17 

─ Video Loss setup screen. 

 
The DVR checks to see if anything is obscuring the camera.  Highlight the slider bar beside Check 
Obscuration, and use the Left and Right arrow buttons to adjust the setting.  The sensitivity can be set 
from Never to 10 (extremely sensitive). 

 

The DVR can be set to react to video loss differently for each camera.  Highlighting the box under the Actions 
heading and pressing the 

 button allows you to set up event actions for video loss. 

 

 Record ─ Associate as many cameras with that camera as you wish.  If the DVR detects video loss on the 

selected camera, it starts recording video from all the associated cameras. 

 Alarm-Out ─ Select between Alarm Output and Beep (DVR’s internal buzzer) that you would like to activate 

and to sound whenever the DVR detects video loss on the selected camera.

 

 

 Notify ─ You can toggle the individual notification items On and Off by highlighting that item and pressing 

the 

 button.  Highlight OK and press the 

 button to accept your changes. 

 PTZ ─ Select the preset position for each PTZ camera, where you want PTZ cameras to move to when the 

DVR detects video loss on the selected camera’s input. 

 Spot Monitor ─ Associate a camera with the Spot monitor.  The DVR will display the associated camera on 

the Spot monitor whenever it detects video loss on the selected camera. 

 

 

 

 

You can save your Video Loss changes by highlighting Save and pressing the 

 button.  Selecting Cancel 

exits the screen without saving the changes.