Mitsubishi Electronics XD8600 ユーザーズマニュアル

EN-55

Using the lamp relay function, you can project images 
continuously. The lamp relay function automatically 
rests or switches the lamps. The lamp relay is 
performed when LAMP SELECT in the INSTALLATION 
1 menu is set to DUAL or SINGLE. 

Either of the lamps is automatically put to rest.
(See page 31 for menu setting.)  
1.  Display the INSTALLATION 1 menu.
2.  Select LAMP SELECT by pressing the  or  button.

3.  Press the ENTER button.
4.  Select DUAL   by pressing the  or  button.

5.  Press the ENTER button.
6.  Select LAMP RELAY by pressing the  or  button.

7.  Select 1H/24H 

 

or

 

2H/1W 

 

by pressing the  or 



 button.

1H/24H    .....Select this setting when the lamp 

is operated at a specified time of 
the day. During the continuous 
projection, LAMP 1 or LAMP 2 is 
automatically turned off for 1 hour 
in 24 hours.  After the interval is set, 
the lamps are turned off for 1 hour 
alternately at the specified interval. 

Illuminating

Off

LAMP 1

LAMP 2

1

2

3

4

5

6

7

8 (days)

At the time of power-on or menu setting

2H/1W    ......During the continuous projection, 

LAMP 1 or LAMP 2 is automatically 

turned off for 2 hours in a week. 

After the interval is set, the lamps are 

turned off for 2 hours alternately at 
the specified interval.

Illuminating

Off

LAMP 1

LAMP 2

1

2

3

4

5

6

7

8 (days)

At the time of power-on or menu setting

8.  Press the ENTER button.

•  When you select 1H/24H   or 2H/1W  , the 

box to set the lamp relay interval is displayed. 

•  When the projector is turned off, the setting is

cleared and the projector resumes operation 
from the time of the power-on or menu setting 
shown in the preceding step.

NEXT LAMP RELAY

23H

0

OK

CLEAR

DEL

CANCEL

1

2

3

4

5

6

7

8

9

←

→

NEXT LAMP RELAY

6D 22H

0

OK

CLEAR

DEL

CANCEL

1

2

3

4

5

6

7

8

9

←

→

9.  Move the key cursor using the direction buttons to 

select the number you want to enter and then press 
the ENTER button.
•  Maximum interval

  1H/24H   ..... 23H (23 hours)

  2H/1W   ...... 6D 22H (6 days and 22 hours)

 ← key: 

 Shifting the position of enter cursor 
to the left for each character.

 → key: 

 Shifting the position of enter cursor 
to the right for each character.

  DEL key: 

 Deleting the character in the 
position of enter cursor for each 
character.

  CLEAR 

key:  Deleting all the entered characters.

•  You can enter the value by pressing the number

buttons (0 to 9) while holding down the NUM 
button on the remote control. 

•  When the value you entered meets the following

conditions, an error dialog box is displayed at 
the screen center. 

  ∙   The value has been cleared by DEL or CLEAR 

and left blank. 

  ∙   The value you entered is out of the setting 

range.

   

1H/24H   .... 24H or over

   

2H/1W    ..... 6D 23H or over

  ∙   The value of each item is out of the setting 

range.

   

D .................. 7 or over (2H/1W   only)

   

H .................. 24 or over

10. When selecting OK, the setting is completed as 

the lamp-switching interval stored. However, when 
selecting CANCEL, the setting is completed without 
storing.
•  The display returns the LAMP RELAY menu after

selecting OK or CANCEL.

•  The setting you made is applied to NEXT LAMP

RELAY in the INFORMATION menu.

Important:
•  When you use the projector continuously, the lamp

relay may not be performed on time due to errors of 
the clock function.