Furuno 711c ユーザーズマニュアル

2.  STEERING MODES

7. Rotate the Course control knob to set the return delay then push the knob. 

The setting range is 1-20 seconds.
•  NAV mode: When the data from the helm sensor is not input for the set time, 

the NAV mode is restored.

•  AUTO, WIND mode, etc. (except NAV mode): When cruising straight ahead 

and the data from the helm sensor is not input for the set time, the previous 
steering mode is restored.

8. Rotate the Course control knob to select [Safe Helm Response] then push the 

knob.

9. The cursor is selecting the current value for [Response]; push the Course control 

knob.

10. Rotate the Course control knob to select a value then push the knob. 

The higher the setting, the faster the response (setting range: 1-10).

11. Press the 

 key to close the [Safe Helm Response] window.

12. Rotate the Course control knob to select the current setting for [Safe Helm Beep] 

then push the knob.

13. Rotate the Course control knob to select [ON] or [OFF] then push the knob. 

[Safe Helm Beep] turns the beep on or off when the safe helm mode is activated.

14. Press the 

 key three times to close the menu.

Safe Helm Response

Response: 

6     

          PORT STBD

Turn helm to PORT/STBD to set
Safe Helm response time.
Higher value = Faster
response.

Push MENU key to return

Not shown with Fantum Feedback

TM

.

When you turn the helm, 
PORT or STBD is highlighted 
according to the rudder 
direction.