Electrolux 3531 WK-M ユーザーズマニュアル

8

Together with the burner ring the burner 
cover forms a space where the final 
mixture of gas and air takes place in 
order to make the gas burn correctly.

Please note: It is consequently very 
important that the burner cover/ring is 
placed correctly on the burner. The 
burner ring has been provided with 
holes for the ignition electrode, and the 
thermo sensor.

If the burner cover/ring are wrongly 
placed the burner will operate 
incorrectly, and the burners may be 
damaged within at short space of time.

The burner has been provided with an 
ignition electrode. As long as the 
operating knob is depressed, the 
automatic ignition will ensure that a 
spark is emitted between the ignition 
electrode and the burner cover.

The hob unit features fully-secured gas 
taps (thermo-fuse)
In case the flame goes out, the thermo 
sensor automatically prevents gas 
admission after a few seconds (max. 90 
seconds).
Note: Gas admission is always allowed 
while the operation button is pressed - 
See start-up procedure

Burner ring   

Burner cover

Burner ring   

Burner cap

Ignition electrode (A) 

  T hermo Sensor (B)

17

This appliance is supplied with an
1800mm long flexible supply lead and 
3 pin plug. The point of connection is 
located at the rear and on the 
underside of the appliance. Connect 
the appliance to a readily accessible 
switched general purpose outlet which 
is adjacent to the appliance.