3D Innovations NC60 ユーザーズマニュアル
Upgrading the Printer Software
Chapter 4: Maintaining the Printer
❖
4-29
Procedure F
Upgrade Procedure via Internet Services
Once the upgrade process has begun do not power
off your printer!
off your printer!
1
Print a Configuration Sheet and a Diagnostics Page.
Keep these pages for future reference. For directions on
doing this, refer to Table 1.20 on page 1-101.
Keep these pages for future reference. For directions on
doing this, refer to Table 1.20 on page 1-101.
2
Launch your web browser and connect to the printer URL
(typically http://ipaddress).
(typically http://ipaddress).
3
Select the Print page to get to the File Download dialog.
4
In the File: box enter the path and name of the upgrade
file, or select the Browse... button to select the upgrade
file.
file, or select the Browse... button to select the upgrade
file.
5
Select the Start button.
6
The upgrade file will be sent to the printer. The upgrade
should take less than 10 minutes to perform.
should take less than 10 minutes to perform.
7
To see if your upgrade was successful, see the section
“Determining a Successful Upgrade” (page 4-20). If
successful, follow the instructions in the section “After the
Upgrade” (page 4-20).
“Determining a Successful Upgrade” (page 4-20). If
successful, follow the instructions in the section “After the
Upgrade” (page 4-20).