Frigidaire MODEL #S ユーザーズマニュアル

7

For best performance, allow 4 hours for the wine/beverage cooler to cool down completely. The wine/beverage cooler 

will run continuously for the first several hours. 

Multi-position adjustable interior shelves can be moved to 

any position for larger or smaller packages. The shipping 

spacers that stabilize the shelves for shipping should be 

removed and discarded. The Beverage Cooler comes 

equipped with three glass shelves.

The light comes on automatically when the door is 

opened. The light can also be turned on and off by 

:

Temperature display
Light: This button turns the light ON and OFF.
Power: This buttons turns the power ON and OFF.
Press both Light and Power buttons at the same time to change between Fahrenheit and Celsius temperatures.

The default temperature for the beverage cooler is 41°F (5°C). The temperature after power failure will be the 

temperature set before the power failure.

To prolong the life of compressor, please wait for at least 5 minutes before the unit is restarted after power failure.

If “E” and “F” are displayed, please contact local service personnel for repair.

If the temperature in the cooler is too low, it will display “L”.

If the temperature in the cooler is too high, the screen will display “H” and will flash. Under this state, the buzzer 

will buzz for 30 seconds. One minute later, the buzzer will continue to buzz for the next 30 seconds. After three 

times, the alarm will not buzz any more. You can press any key to cancel sound alarm.
Storing too many cans or bottles in the cooler may cause the temperature in the cooler to rise temporarily.

 

Press this button once to increase temperature 1° F/C.
Press this button once to decrease temperature 1° F/C.

pressing the “Light” button on the control panel. Press 

the button twice to keep the light on when the door is 

closed.

This unit is equipped with a lock near the bottom of the 

door. Two keys are provided. Keep the keys out of reach 

of children.

  1.  The beverage cooler can be operated by adjusting the temperature control buttons (up arrow and down arrow) 

to the various settings.

  2.  The new desired temperature will flash on the display for a few seconds and then switch back to the actual 

temperature which will gradually change until setpoint is reached.

The temperature range MIN and MAX is 33° - 50°F (1° - 10°C).