Frigidaire MODEL #S ユーザーズマニュアル

5

The glass door can be opened from left to right and vice 

versa. Should you desire to change the opening direction, 

please follow these instructions.

Í

All parts removed must be saved to do the 

reinstallation of the door.

Remove top cap. Remove the three screws that hold 

the upper hinge (right side) to the top of the cabinet. 

See Fig. 1. 
Carefully remove top hinge (See Fig. 1.), then lift the 

door up off of bottom hinge and place it on a padded 

surface to prevent scratching it. See Fig. 2.
Remove the three button plugs from the upper left 

corner of the cabinet and transfer them to the  holes 

on the opposite side. Be sure to press the button 

plugs firmly into the holes. See Fig. 1.
Remove three screws that hold the bottom hinge to 

lower end of cabinet. Remove the three button plugs 

from lower LH corner and transfer to holes where 

bottom hinge was just removed. See Fig. 3.
Unscrew pins from both hinges and transfer to 

threaded hole on opposite side. See Fig. 4. Re-install 

bottom hinge in LH corner of cabinet using same 

three screws removed in Step 4.
On bottom edge of door, transfer door stop bracket 

and bushing to holes on opposite side. See Fig. 6.
On top edge of door, transfer the button plugs and 

bushing to hole on opposite side. See Fig. 7.
Place bottom LH corner of door onto lower hinge, 

then install top hinge to cabinet. Make sure door 

is level and it seals properly against cabinet, then 

securely fasten three screws. See Fig. 7. Snap top 

cap back onto hinge.

Screws

Top cap

Bushing

Hinge

Button plugs

 

 

Move pin to 

opposite hole 

(upper and 

lower hinges)

ĸ 

Button plugs

Screws

Hinge

Button plugs

Screws