Hitachi r-sf42bms ユーザーズマニュアル

ページ / 60
53
Troubleshooting
When this happens
Please check. This is the cause.
It smells strange
Ice smells
It smells like 
plastic
It smells in the 
refrigerator
● Do the water supply container and/or water fi lter become dirty? or Does ice become old?
→ Wash them on regular basis to prevent 
“slime” and/or “fur”. 
Pg.50
● Chlorine may strongly smell because chlorine in tap water is condensed.
● This smell occurs because a lot of plastic parts are used in the refrigerator, but the smell 
decreases gradually while cooling. Keep the room ventilated.
● Is any food which strongly smells stored without any wrapping?
→ The deodorizing function cannot completely remove all smells.
  Seal that kind of food with plastic fi lm etc. to store it.
Check the usage of the refrigerator
● Temperature in the refrigerator rises little by little while its door is open. If opening/closing the 
door frequently or leaving the door open for a long time, temperature cannot easily lower.
→ Reduce the number of times of opening and closing the door or open/close the door quickly.
Refrigerator does not cool
Refrigerator does 
not cool.
Frost and/or dew 
occur.
Ice cream 
becomes soft.
Check the storage state of food
● Does any food or package caught in the door prevent the door from closing 
completely?
→ Check that there is not any space between the door seal and its contact surface 
when the door is closed.
● Is food squeezed in? or Is a large amount of food put in at a time?
→ Make sure that any food does not protrude beyond the storage height limit of 
each compartment, and do not store the amount of food that may prevent the 
door from opening and closing.
→ Allow clearance between each food in each compartment.
● Are Upper Freezer case and Slimline slide case installed correctly?
→ Install them correctly. 
Pg.49
Check the temperature setting
● Refrigerator may not cool fully when the temperature setting is “MIN.”. 
Pg.41, 43
→ Switch the temperature setting of the compartment where it does not fully cool to “MID.” or 
“MAX.”.
● Does the temperature around the refrigerator become high due to a seasonal factor (ex: using in 
summer)?
→ Switch the temperature setting of the compartment where it does not fully cool to “MAX.”.
Check the installation state
● Refrigerator may not fully cool according to the installation place, the clearance around it and the 
surrounding conditions.
Check whether it has been installed correctly. 
Pg.36
There is a space 
between the 
door seal and its 
contact surface.