Cornelius 620053923 ユーザーズマニュアル

Icemaker & Adaptor Hold-Down Kit Installation Instructions

- 3 -

Publication Number: 629096853INS

Figure 4

Repeat Steps 1 through 4 for the opposite side of the dispenser.

Using the supplied silicone tube, seal icemaker all around to the adapter top, as shown in Figure 5.

Figure 5

Locate the icemaker mounting plates at the rear of the icemaker and position as shown in Figure 6, if plates

are not already installed.

NOTE: Kit contains two plates, both mounting plates must be installed.

Figure 6

Using the plate as a template, drill 9/64 in. (0.140 in.) holes into the icemaker base and the dispenser, as

shown in Figure 7.

Flange on bracket
MUST Go Over the
Top of the Adapter
Lid as Shown.

Run a Continuous
Bead of Caulking
Around the Adapter
Top