Cornelius 620053923 사용자 설명서
Icemaker & Adaptor Hold-Down Kit Installation Instructions
© 2008, IMI Cornelius Inc.
- 3 -
Publication Number: 629096853INS
Figure 4
5.
Repeat Steps 1 through 4 for the opposite side of the dispenser.
6.
Using the supplied silicone tube, seal icemaker all around to the adapter top, as shown in Figure 5.
Figure 5
7.
Locate the icemaker mounting plates at the rear of the icemaker and position as shown in Figure 6, if plates
are not already installed.
NOTE: Kit contains two plates, both mounting plates must be installed.
Figure 6
8.
Using the plate as a template, drill 9/64 in. (0.140 in.) holes into the icemaker base and the dispenser, as
shown in Figure 7.
Flange on bracket
MUST Go Over the
Top of the Adapter
Lid as Shown.
MUST Go Over the
Top of the Adapter
Lid as Shown.
Run a Continuous
Bead of Caulking
Around the Adapter
Top
Bead of Caulking
Around the Adapter
Top