Sharp AX-1110(SL)M ユーザーズマニュアル

ページ / 59
22
TROUBLESHOOTING CHART
Due to technical error, call your dealer or an authorised 
SHARP Service Agent.
The water in the internal steam system is frozen.
Operate the oven with Grill without food for 10 minutes. 
See page 16.
The time you set is over the maximum time for Steam High 
or Steam Low. Press STOP/CLEAR and re-programme.
The oven is too hot to use for Steam Defrost, Auto Defrost 
Menus or Steam Low. Remove food from oven and allow to 
cool until the message clears.
 
Remove water tank and fi ll with water to the MAX mark. 
Replace and push firmly into place, then press STOP/
CLEAR
 to clear the error message. 
Make sure that the water tank is fi lled to the MAX mark with 
room temperature drinking water.
To continue the cooking, cook manually. Check the cooking 
progress from time to time.
NOTES:
1. Ensure you do not use any other liquids like distilled 
water, mineral water and etc.
2. When this error message appears again and again even 
if you fi ll the water tank with water, the internal steam 
system may be out of order. Call your dealer or an 
authorised SHARP Service Agent. You can use the oven 
for the cooking modes which do not use steam.
Follow step-by-step instructions for descaling. 
See page 10.
The oven cabinet and oven cavity are very hot. 
Pay extra attention not to burn yourself.
If EE is displayed or you think the oven is not working properly, check the chart below before consulting an 
authorised SHARP Service Agent. This will help to prevent unnecessary service calls.
TECHNICAL ERROR MESSAGE / INFORMATION MESSAGE
TECHNICAL ERROR 
MESSAGE
INFORMATION
MESSAGE
EE 
Err (when pressing START/
AUTO MINUTE
)
Err (when pressing STEAM 
HIGH
 or STEAM LOW)
Err, HOT (fl ashing)
Err, WATER (fl ashing)
DESCALE (fl ashing)
HOT (fl ashing)
MESSAGE ON DISPLAY
ACTION
Troubleshooting Chart
WARNING:
Never adjust, repair or modify the oven by yourself. It is hazardous for anyone other 
than a qualifi ed service technician trained by SHARP to carry out any service or repair 
operation. This is important as it may involve the removal of covers that provide protection 
against electrical parts.
• Repairs and Modifi cations: Do not attempt to operate the oven if it is not working properly.
• Outer cabinet: Never remove the outer cabinet to avoid the possibility of electric shock or burns.
AX-1110(SL)M_eng.indd   22
AX-1110(SL)M_eng.indd   22
8/16/2013   11:03:59 AM
8/16/2013   11:03:59 AM