Intel SR1680MV ユーザーズマニュアル

109

Appendix B: Troubleshooting

This chapter helps you identify and solve problems that might occur while you are using 

the system.

For any issue, first ensure you are using the latest firmware and files. Firmware upgrades 

include updates for BIOS, and the baseboard management controller (BMC). See 

 for a link to the software updates. In addition to 

the server firmware and files, also update any drivers used for components you have 

installed in your system, such as video drivers, network drivers, and SCSI drivers.

If you cannot resolve your server problems on your own, refer to the 

 for assistance.

Resetting the System

Before going through in-depth troubleshooting, attempt first to perform reset your system 

using one of the following methods.

Problems following Initial System Installation

Problems that occur at initial system startup are usually caused by an incorrect installation 

or configuration. Hardware failure is a less frequent cause.

First Steps Checklist

•

Is AC power available at the wall outlet?

•

Are the power supplies plugged in? Check the AC cable(s) on the back of the chassis 

and at the AC source.

Table 44. Resetting the System

Soft boot reset to clear the system memory and reload the operating 
system

<Ctrl+Alt+Del>

Clear system memory, restart POST, and reload the operating system

Reset button

Cold boot reset. Turn the system power off and then on. This clears 
system memory, restarts POST, reloads the operating system, and halts 
power to all peripherals

Power off/on 
button