Intel SR1680MV ユーザーズマニュアル

36

Installing Air Ducts

Reverse the 

 steps to install the air duct.

PCI-E Cage

The left and right I/O board cage modules each include one PCI-E cage. Two PCI-E cages 

on the server share the same removal and installation procedures. For your reference, this 

section provides the steps of removing and installing one PCI-E cage on the right I/O 

board cage module as an example.

Figure 42 shows the location of the PCI-E cage on the right I/O board cage module:

Figure 42. PCI-E Cage Location

1. Make sure the server is not turned on or connected to the AC power. To power off 

the server, see 

2. Remove the left and right I/O board cage modules. To remove the cover, see 

3. Disconnect all necessary cable connections.

Removing a PCI-E Cage

1. Lift the PCI cage up from the I/O board cage module along the direction of the 

arrow.