Intel SR1680MV ユーザーズマニュアル

38

Figure 45. Securing the Slot Cover

6. Loosen and remove the two securing screws as shown in 

7. Pull the riser card out from the PCI-E cage along the direction of the arrow.

Figure 46. Removing the Riser Card

Installing a PCI-E Cage

Reverse the 

 steps to install the PCI-E cage.

Daughter Cards (Optional)

There are two optional daughter cards supported by each IO board. The 10 GB IO card 

and the InfiniBand card share the same removal and installation procedure. For your 

reference, this section takes the steps of removing and installing 10GB IO card as 

example.

Figure 47 shows the location of the 10 GB IO card.