Motorola T1/E1 ユーザーズマニュアル

Canopy  T1/E1 Multiplexer 

 

 

 

 

 

 

September 2004 

 

 

 

 

 

 

     

      T1/E1 Multiplexer FPGA Version 3.4 

 
 

 

Page 28 of 73 

 

 

WARNING! 

Substitution of the power supply may impair intrinsic safety.  The  
Canopy T1/E1 Multiplexer must be used with Model Number TR10R033 
manufactured by Cincon Electronics Co., Ltd.

 

 

 
Verify the contents shipped against the packing list for the box. You should have received 
the following: 

◦ T1/E1 

unit 

◦ 

AC Power supply (Option 1 only) 

◦ 

CD ROM (EMS GUI and the software download application) 

Select the appropriate type of cable for connection to the Ethernet port of the Canopy 
T1/E1 Multiplexer as follows:  

◦ 

For connection to a LAN or a switch, a straight-through cable is required.  

◦ 

For connection to the NIC card in a PC, a crossover cable is required. 

◦ 

For connection to a PBX, a T1/E1 crossover cable is likely required. Refer to your 
PBX installation instruction manual for specific requirements. 

Mounting option for the unit is either a desk mount or a rack mount. Follow this procedure 
to affix the until to a rack mount: 

Remove the Front Panel by removing Front Panel Mounting Screws. 

1.  Remove the two screw posts from the DB-9 connector. 

2.  Remove Front Bezel and set aside. 

Issue 3