Motorola T1/E1 ユーザーズマニュアル

Canopy  T1/E1 Multiplexer 

 

 

 

 

 

 

September 2004 

 

 

 

 

 

 

     

      T1/E1 Multiplexer FPGA Version 3.4 

 
 

 

Page 29 of 73 

 

3.  Place the Canopy T1/E1 Multiplexer behind the desired Rack Panel mounting 

hole.   
NOTE: The Rack Panel will support three (3) Canopy T1/E1 Multiplexers. 

4.  Place the Front Panel on the front of the Rack Panel opening, positioning the 

Rack Panel Spacer between the two panels.  

5.  Insert the front panel mounting screws through the screw holes.  

6. Tighten 

screws. 

7.  Insert the screw posts onto the DB-9 connector. 

8.  Tighten screw posts. 

9.  Mount the Canopy T1/E1 Multiplexer with the rack panel onto your rack unit. 

Consult the product information supplied by the rack manufacturer for details. 
NOTE: The front panel mounting screws should be 4-40 screws, between 3/8” 
and 5/8” long. 

1 RD(R) 

Input 

Receive data (ring) 

2 RD(T) 

Input 

Receive data (tip) 

3 FGND 

 

 

4 

TD(R) 

Output 

Transmit data (ring) 

5 

TD(T) 

Output 

Transmit data (tip) 

6 FGND 

 

 

7, 8 

FGND 

Not connected 

 

Issue 3