Extron electronic MGP 464W ユーザーズマニュアル

© 2009  Extron Electronics.  All rights reserved.

. 

Use the Input Configuration menu to make any desired advanced adjustments, including Horizontal and Vertical 

Start, Pixel Phase, Total Pixels, Active Pixels, and Active Lines; or,

 

Perform Auto-Image

™

.  Auto-Image is a quick way to size an input to fit the current window size.  To perform 

Auto-Image on an input,

.  Press the button for the input that you want to auto size.

.  Press the Menu button once to select the Auto-Image menu.

.  Press the Next button to display the Auto-Image screen.

.  Turn either Adjust knob to select a window to Auto-Image.

.  Press the Next button again to perform an Auto-Image in the selected window. 

. 

Size and position each window as desired for your application as follows:

.  Press one of the Window Select buttons to select the window to adjust.

.  Press the Window/Image Position button once, and rotate the Adjust knobs to change the X and Y position.

.  Press the Window/Image Size button once, and rotate the Adjust knobs to change the width and height of 

the selected window.

.  If you want to adjust any contrast, brightness, color, tint, or detail settings, press the appropriate picture 

control button and rotate the Adjust knobs to select the values.

.  Repeat steps a through d for the remaining windows as needed.

.  Save your configuration as a window preset (see below).

.  Size and position windows as desired for each of your applications.  Save each one to any of the remaining 127 

window preset names for easy recall of window settings (see below).

After configuration, save the settings as a window preset, as follows:
1

. 

Press the Preset Recall/Save button and hold it for at least 2 seconds, until the LCD panel displays the message 

"Window Preset / Save to #nnn".

. 

Rotate either Adjust knob to select the preset number/name to which you want to save this configuration.

. 

Press the Enter button.

To recall and apply a saved preset, press the Preset Recall/Save button and immediately release it.  The LCD window 

displays "Window Preset / Recall #nnn".  Rotate either Adjust knob to select a preset number, then press Enter.

When setting up the MGP, you can issue SIS commands from your computer to the MGP via RS-232/422 or Ethernet, 

as an alternative to the front panel controls.  (Refer to your MGP user's manual for a complete list of SIS commands.) 

Select an input

X50)

 * 

X50@

 !

Out 

X50@

 * 

In

 X50)

 

]

Select input 

X50)

 

in window

 

X50@

.

Mute (blank) a window
Unmute a window

X50@

 * 1B

X50@

 * 0B

X50@

 Blk1

 

]

X50@

 Blk0

 

]

Blank (mute) window 

X50@

.

Unmute window 

X50@

.

Perform Auto-Image

55 * 

X50@

 #

Img 

X50@

 

]

Perform Auto-Image on input in window 

X50@

.

Save window preset
Recall window preset

2 * 

X51#

 ,

2 * 

X51#

 .

Spr2 * 

X51#

 

]

Rpr2 * 

X51#

 

]

Save window settings as preset 

X51#

.

Recall window preset 

X51#

.

 

X50)

  =  Input number (1-19) 

X50@

  =  Window number (1-2 or 1-4); 0 = all windows (mute, input selection, and freeze only) 

X51#

  =  Window preset number: 1-128

Extron 

USA - West 

Headquarters

Inside USA / Canada Only

+1.714.491.1517 FAX

Extron 

Inside USA / Canada Only

+1.919.863.1797 FAX

Extron 

Inside Europe Only

+31.33.453.4050 FAX

Extron 

Inside Asia Only

+65.6383.4664 FAX

Extron 

+81.3.3511.7656 FAX

Extron 

Inside China Only

+86.21.3760.1566 FAX

Extron 

+971.4.2991880 FAX