Q-Logic 16-Feb ユーザーズマニュアル
2 – General Description
Ethernet Port
Ethernet Port
2-8
59021-06 A
D
2.3
Ethernet Port
The Ethernet port shown in
is an RJ-45 connector that provides a
connection to a management workstation. A management workstation can be a
Windows, Solaris™, or a Linux® workstation that is used to configure and
manage the switch fabric. You can manage the switch over an Ethernet
connection using SANbox Manager, the Command Line Interface (CLI), or SNMP.
The switch through which the fabric is managed is called the fabric management
switch.
Windows, Solaris™, or a Linux® workstation that is used to configure and
manage the switch fabric. You can manage the switch over an Ethernet
connection using SANbox Manager, the Command Line Interface (CLI), or SNMP.
The switch through which the fabric is managed is called the fabric management
switch.
Figure 2-7. Ethernet Port
2.4
Serial Port
The SANbox2-16 switch is equipped with an RS-232 serial port for maintenance
purposes. The serial port location is shown in
purposes. The serial port location is shown in
. You can manage the
switch through the serial port using the CLI.
Figure 2-8. Serial Port and Pin Identification
RJ-45 Ethernet Port
1
6
5
9
Serial Port