Motorola MOT-VT1005 ユーザーズマニュアル
19
VT1000v Series Voice Terminal User Guide
Basic Configuration
To perform basic configuration:
1
On a computer connected to the voice terminal PC port or a router, start a Web
browser such as Microsoft
browser such as Microsoft
®
Internet Explorer or Netscape Navigator
®
.
2
In the Address or Location field, type http://192.168.102.1 and press
ENTER
to
display the
3
Click Basic Configuration to display the Basic Configuration window. Its fields are:
Obtain IP
Address
Dynamically
Address
Dynamically
This setting is enabled by default. If either of the following is true, no
configuration on this page is required:
■ If you have a cable modem with no router and your cable provider
configuration on this page is required:
■ If you have a cable modem with no router and your cable provider
assigns IP addresses dynamically, the Motorola voice terminal
obtains its IP address dynamically from your cable provider.
obtains its IP address dynamically from your cable provider.
■ If you have a router with DHCP enabled, the Motorola voice
terminal obtains its IP address dynamically from your router.
Specify Static
IP Address
IP Address
If your broadband provider requires a static IP address, enable
Specify Static IP Address. Type the Static IP Address and IP
addresses for the Subnet Mask, Default Gateway they provide.
Specify Static IP Address. Type the Static IP Address and IP
addresses for the Subnet Mask, Default Gateway they provide.
Enable PPPoE If you have a DSL modem and no router, enable PPPoE and type the
Service Name, User Name, and Password provided by your
DSL provider.
DSL provider.