Motorola MOT-VT1005 ユーザーズマニュアル
20
4
Verify that all fields are correctly filled in and click Save Changes. The message
This will require a reboot of the unit. Are you sure?
This will require a reboot of the unit. Are you sure?
is displayed.
5
Click OK. Wait about one minute. You cannot display the configuration pages while
the Motorola voice terminal starts up. After the Motorola voice terminal restarts, click
the Web browser Refresh button to display the configuration pages.
the Motorola voice terminal starts up. After the Motorola voice terminal restarts, click
the Web browser Refresh button to display the configuration pages.
6
Pick up the telephone hand set and listen for a dial tone. If you hear a dial tone, you
can now place a phone call as you would with any telephone.
can now place a phone call as you would with any telephone.
Specify DNS
Servers
Servers
Enables you to specify Domain Name System (DNS) servers, if
necessary:
■ If Obtain IP Address Dynamically or Enable PPPoE are selected,
necessary:
■ If Obtain IP Address Dynamically or Enable PPPoE are selected,
Specify DNS Servers is off by default. If required by your
broadband provider only, select Specify DNS Servers and type
the DNS server IP addresses provided by your broadband
provider.
broadband provider only, select Specify DNS Servers and type
the DNS server IP addresses provided by your broadband
provider.
■ If Specify Static IP Address is selected, Specify DNS Servers is
selected by default. Because no DNS server is automatically
assigned, you need to type the DNS server IP addresses
provided by your broadband provider.
assigned, you need to type the DNS server IP addresses
provided by your broadband provider.